Rockwell Automation 2090 Ultra3000 Servo Drives Integration Manual User Manual
Page 56
Advertising
Publication 2098-IN005C-EN-P — March 2008
56
Commissioning Your Ultra3000 Drive
6. Click the Associated Axes tab.
7. Click New Axis.
The New Tag dialog opens.
8. Configure the new tag.
a. In the Name box, enter your axis name.
b. From the Data Type pull-down menu, choose AXIS_SERVO.
9. Click OK.
10. From the Channel 0 pull-down menu, choose your axis.
11. Click OK.
Advertising
This manual is related to the following products: