Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 101)

Collecting Performance Data Chapter 3
2. Under Data Points, select a data point, and then click
Select.
The data point that you have selected appears in the
Data Point box.
• Configure a FactoryTalk Transaction Manager Expression
for the Event Value
1. Under Expression, click Edit.
The Expression Editor dialog box appears.
2. Follow the steps described in "Using the Expression
Editor (page 104)", and define your expression.
3. Select or create an Event Value/Reason Code Lookup List, if
you have selected any of these event value types:
• Collect Value at the Start of the Event
• Collect Value at the End of the Event
• Collect Value at the Start and the End of the Event
With the lookup list you can provide descriptive names for
your event values:
Under Event Value/Reason Code Lookup List, select an
existing lookup list for your event value.
• To edit the list, click Edit List.
The Lookup Code Configuration dialog box appears.
• To create a new list, click Create List.
The Lookup Code Configuration dialog box appears.
TIP
See "Creating Event Value Reason Code Lookup
Lists (page 109)" for details.
4. Continue with "Configuring the Machine State / Faults (page
111)".
Event Value Types
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 101