Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 32)

Chapter 3 Collecting Performance Data
5. Change the default name to
Shift A
, and then press Enter.
In the right pane of the dialog box, the default settings of your
new time pattern are displayed.
TIP
The State value type set to Unavailable indicates that any
periods of time that are not listed as Available in the Time
Spans list will be considered Unavailable.
6. Clear the Lock Times check box.
The shift times will be relative to the start and end times
specified in the Work Day time pattern.
7. Under Duration, click .
The Time Pattern Duration dialog box appears.
8. Under Duration Type, select Custom, and set the duration to
8 Hours
.
9. Click OK.
10. Under Report Name, type
Shift A
.
32 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014