Rockwell Automation FactoryTalk Metrics User Guide User Manual
Page 204
Chapter 5 Analyzing FactoryTalk Metrics Data
1. On the Layout tab, select the Apply a Custom Filter check
box.
2. Click New....
The OEE Box Filter dialog box appears. You can use this
dialog box to specify the shifts and parts that will be included
in the OEE rating, and the time range for which the OEE
rating will be displayed.
3. In the Filter Name box, type
Past 30 Minutes.
4. Clear the All Times check box.
5. Click
.
The The Past text box becomes editable.
6. Change the value from
10 to 30, and select minutes in the list.
7. To specify the shift that you want to filter on, under
Additional Filtering, select Shifts in the Filter On list.
8. Make sure the default All Shifts option is selected.
204
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014