Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 35)

Collecting Performance Data Chapter 3
3. Under Time Spans, right-click the area and then click New
Time Span.
The Time Span dialog box appears.
4. Under Value Type, select Time Pattern.
With the Time Pattern option, you will create a time pattern
for a particular shift.
5. Under Value, select Shift A.
6. Set the start time to
0:00
(midnight), and the end time to
8:00
(AM).
7. Click OK.
8. Under Time Spans, right-click the area and then click New
Time Span.
The Time Span dialog box appears.
9. Under Value Type, select Time Pattern.
10. Under Value, select Shift B.
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 35