Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 158)

Chapter 4 Automated Configuration
NOTE
If you create a configuration for the workcells that have already
been configured, the existing workcell information will be
overwritten in the database when the configuration is imported
and registered.
4. Next to the FTTM XML out file box, click .
The Open dialog box appears.
5. Navigate to the location in which you want to store the
FactoryTalk Transaction Manager XML configuration file.
This is a file with the configuration data that you will import
to FactoryTalk Transaction Manager.
6. In the File name box, type a name for the file, and then click
Open.
The file appears in the FTTM XML out file box.
7. In the FTTM config name box, type the name for the
FactoryTalk Transaction Manager configuration you are
creating or the name of an existing configuration that you
want to update.
In this example, the configuration is named
FTTMconfiguration
.
8. In the FTTM config path box, type the location of or click
to navigate to the location of the FactoryTalk Transaction
Manager configuration files.
In this location all files related to your FactoryTalk
Transaction Manager and FactoryTalk Metrics configuration
are stored, such as the configuration and log files.
• If you modify an existing configuration, point to its location
path.
• If you create a new configuration, the path you provide will
be used as the location of the configuration file.
9. In the Connector user name box, type the user name for the
FactoryTalk directory as defined in the FactoryTalk
158 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014