Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 189)

Analyzing FactoryTalk Metrics Data Chapter 5
In the Chart Fields step, you will select the fields from the report
data source that will be shown in the chart. This dialog box would
look different if you had selected the Columns option in the Data
Configuration step of the wizard.
To select the fields to be charted:
1. Since you want to have a bar for each workcell and you want
the names of the workcells to appear in the legend, select
Workcell Description from the LEGEND list.
2. From the VALUE list select the Running Seconds field . This
is the field that will provide the values for the height of the
bars.
3. When you selected the Running Seconds field from the
VALUE list, COUNT(Running Seconds) was added to the
list at the bottom of the dialog box. To change the function
that is applied to the field, select the COUNT(Running
Seconds) field in the list, click Function, and select AVG
from the menu.
This action changes the function from COUNT(Running
Seconds) to AVG(Running Seconds). The AVG(Running
Seconds) function will return the average running time value
for each workcell.
4. Now you will add Start Time labels to the X-axis. This will
allow you to group the average running time values for the
Step 6: Select the Fields To Be
Charted
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 189