Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 157)

Automated Configuration Chapter 4
8. Do any of the following:
• If you are creating a new FactoryTalk Transaction Manager
configuration, go to "Step 2. Define a FactoryTalk
Transaction Manager Configuration (page 157)".
• If you are creating or updating a FactoryTalk Metrics
configuration, go to "Step 5. Define a FactoryTalk Metrics
Configuration (page 166)".
• If you want to load additional machine states or lookup lists
for your FactoryTalk Metrics configuration, go to "Step 4.
Import Lookup Lists and Machine States (page 164)".
In this step you will define a FactoryTalk Transaction Manager
configuration for the workcells that you will select, update the
selected workcells, if needed, and import the configuration to
FactoryTalk Transaction Manager.
To select workcells and define the FactoryTalk Transaction
Manager configuration for them:
1. Click the FT Transaction Manager tab.
2. Select the workcells for which you want to create the
configuration.
By default, all the workcells are selected.
• To select the workcells individually, click Deselect all, and
then select the Generate check box next to the workcell of
your choice.
• To select all workcells, click Select all.
3. Modify the selected workcells as needed.
• For details on the PackML UDT configuration items, see
"PackML UDT Configuration Items (page 160)".
• For details on the FTM UDT configuration items, see
"FTM UDT Configuration Items (page 161)".
Step 2. Define a FactoryTalk
Transaction Manager
Configuration
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 157