Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 69)

Collecting Performance Data Chapter 3
The data point appears in the Data Point box in the
Configure Performance Parameters dialog box.
TIP
To delete the data point that you have selected,
click Clear.
If no data point is selected, the scheduled availability will be
determined from the current shift.
If the optional data point for the scheduled availability is
selected, that is the only value used to determine the state of
the scheduled availability.
If only the Shift Id data point is selected, the plant model
activity area will be considered to be scheduled available
when the Shift Id value indicates that a shift is currently
active.
The value collected for Shift Id is interpreted as an integer
value.
A positive value indicates that the plant model activity area
is in an active shift.
A zero or negative value indicates that the plant model
activity area is out of shift.
Any time that it is in an active shift is considered to be
scheduled available, and any out-of-shift time is scheduled
unavailable.
• A configured Capacity Time Pattern specifies the Plant
Model Activity Area’s Scheduled Availability and Capacity
state.
Select this option to define when the activity area is scheduled
to be available. If the availability of the activity area is based on
a time pattern, the OEE rating of the activity area will not be
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 69