Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 159)

Automated Configuration Chapter 4
Administration Console. Follow this structure:
ComputerName\UserName
or
DomainName\UserName
.
10. In the Connector password box, type the user password for
the connector.
If you do not enter a password and there is already an existing
password assigned to the particular user, the password remains
unchanged.
11. (Optional) Select the DataPoints only option, if you want to
have only data points (data tags) generated for the modified
workcells.
Use this option if you want to update an existing configuration
with new data rather than overwrite it entirely.
12. Click Generate FTTM XML.
The following message appears:
13. Click OK.
14. Click Import to FTTM.
The following message appears:
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 159