Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 162)

Chapter 4 Automated Configuration
To set values for multiple workcells in the list:
1. Select the Generate check box next to the workcells that you
want to modify.
2. Type the values in the respective boxes.
Each box applies to the column right below it.
3. Click Apply.
NOTE
If you have updated an existing FactoryTalk Transaction Manager
configuration that is already registered in the Service Console, go to
"Step 4. Create Lookup Lists and Machine States (page 164)" or "Step 5.
Define a FactoryTalk Metrics Configuration (page 166)".
To register the FactoryTalk Transaction Manager configuration
for data collection:
1. Open the Service Console.
2. Expand Security Services Manager > Servers > Information
Services Manager.
3. Right-click Data Collection, and then click Register
FactoryTalk Transaction Manager Configuration.
The FactoryTalk Transaction Manager to RSBizWare
Registration Wizard appears.
4. Click Next.
5. On the Local or Remote page, click:
Step 3. Register the
FactoryTalk Transaction
Manager Configuration for
Data Collection
162 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014