Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 92)

Chapter 3 Collecting Performance Data
TIP
For information on individual data summarization types, see
"Event Data Summarization Types (page 92)".
4. Continue with "Configuring the Event Trigger (page 93)".
Event data summarization defines how FactoryTalk Metrics will
handle the creation of multiple summary records in the database for
a single occurrence of an event.
There are the following event data summarization types:
Use this data summarization type: To:
Scheduled Shift Start Summarize the event data at the beginning of each shift defined in the
schedule that was selected as a part of the Performance Parameters
configuration.
If no schedule was selected, a new shift is created at midnight of each day.
Scheduled Shift Start and End Summarize the event data at the beginning of each shift.
Shifts may not be configured continuously and there may be gaps of time
between the end of a shift and the start of the next shift. This time is
known as Out of Shift time. The event data will also be summarized at the
end of any shift that is followed by Out of Shift time.
Any Scheduled Shift Change Summarize the event data when transitions from available to unavailable
time within a shift happen. The event data will be summarized when these
transitions happen as well as at the start of a shift and at the end of a shift
that is followed by Out of Shift time.
Summarization Criteria Change Summarize the event data when there is a change in any Summarization
Criteria, Part Id, or Cycle Time that is being monitored for a Performance
Parameters configuration.
If there are no Summarization Criteria, Part Id or Cycle Time being
monitored as a part of the Performance Parameters configuration then no
Data Summarization will occur for the event.
Scheduled Shift Start or Summarization Criteria Change Summarize the event data at the beginning of each shift as well as when
there is a change in any Summarization Criteria, Part Id, or Cycle Time that
is being monitored for the Performance Parameters configuration.
This data summarization type is a combination of the Scheduled Shift Start
and Summarization Criteria Change types.
Event Data Summarization
Types
92 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014