Configuring work week time patterns – Rockwell Automation FactoryTalk Metrics User Guide User Manual
Page 36
Chapter 3 Collecting Performance Data
11. Set the start time to
8:00
(AM), and the end time to
16:00
(4
PM).
NOTE
Type the time in the 24-hour format.
12. Click OK.
13. Under Time Spans, right-click the area and then click New
Time Span.
The Time Span dialog box appears.
14. Under Value Type, select Time Pattern.
15. Under Value, select Shift C.
16. Set the start time to
16:00
(4 PM), and the end time to
24:00
(midnight).
To configure a Work Week time pattern:
1. In the Time Patterns dialog box, right-click My Time
Patterns, and then click New Time Pattern.
A new time pattern is added to the tree.
2. Change the default name to
Work Week
.
3. Under Duration, click
.
The Time Pattern Duration dialog box appears.
4. Under Duration Type, select 1 Week.
Configuring Work Week Time
Patterns
36
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014