Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 137)

Collecting Performance Data Chapter 3
Click: To:
Update the table with the data range that you have chosen.
Show data without any time filters applied.
Show data between a start and end date.
For example:
Show data for the past X time units.
For example:
Show data for the past X time units before the end date that you have specified.
For example:
Show data for the next X time units after the start date that you have specified.
For example:
Click , and then , if the data is not loaded
automatically.
The table is populated with all data that has been collected for
this activity area.
4. Right-click a record that you want to edit, and then click
Manual Data Collection Properties.
The FactoryTalk Metrics Manual Data Collection dialog
box appears.
The content of the dialog box differs depending on what
record type (Count, Event, Schedule, OEE, Schedule, or
Scrap) you want to change.
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 137