Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 160)

Chapter 4 Automated Configuration
15. Click OK.
The configuration is imported to FactoryTalk Transaction
Manager.
If the configuration was imported with errors, a message listing
the number and code of the errors appears.
Check the error log file for details, correct the configuration,
and then try again.
The error log file is stored in the FTTM configuration path
that you selected in step 8.
The name of the file is structured in the following way:
<ConfigurationName>_XML.log.
16. Do any of the following:
• If you created a new configuration, go to "Step 3. Register
the FactoryTalk Transaction Manager Configuration for
Data Collection (page 162)".
• If you want to load machine states and/or lookup lists to
your configuration, go to "Step 4. Import Lookup Lists and
Machine States (page 164)".
• If you want to define a FactoryTalk Metrics configuration,
go to "Step 5. Define a FactoryTalk Metrics Configuration
(page 166)".
The following workcell properties are displayed for the PackML
UDT configuration after you click Load from Controller on the
Start tab:
Item Description
Path The path to the workcell in the PackML data structure.
This box is read-only.
Work Cell Name The name of the workcell in the PackML data structure.
This box is read-only.
PackML UDT Configuration
Items
160 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014