Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 48)

Chapter 3 Collecting Performance Data
• Cycle times for individual Part Ids.
Click the links below to learn how to:
• Configure the default cycle time for Total Parts. (page 48)
• Configure the ideal cycle time values for individual Part Ids.
(page 48)
• Manage Part Id configurations. (page 49)
• Import the cycle time values for individual Part Ids. (page 49)
To configure the default Cycle Time for Total Parts:
1. In the List Description box, type a name for the new Part
Id/Cycle Time lookup list.
The name will be displayed in the Part Id/Cycle Time Lookup
list in the Part Id/Cycle Time section of the Configure
Performance Parameters dialog box.
2. In the Default Cycle Time box, type a value for the default
cycle time for Total Parts in seconds.
To configure the Ideal Cycle Time values for individual Part Ids:
1. Under Part Ids and Cycle Times, click Add.
2. The Part Id/Cycle Time Values dialog box appears.
3. In the Part Id box, type the name of the Part Id for which you
want to set the cycle time.
Configuring the Default
Cycle Time for Total Parts
Configuring Ideal Cycle
Time Values for Individual
Part Ids
48 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014