Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 121)

Collecting Performance Data Chapter 3
• FT.SampleEnterprise.Workcell_STATE
This monitored value data point can have one of the following
values:
This value: Maps to this machine state:
0 (running) Running
1 (setup) Setup
2 (test) Test
3 (down) Down
4 (off) This value does not map to any particular machine state, so
by default it maps to the
Undefined
machine state.
• FT.SampleEnterprise.Workcell_BLOCKED
When this monitored bit data point is on (1), the value maps
to the Blocked machine state.
When this data point is on, the
FT.SampleEnterprise.Workcell_STATE data point has the
value of Down (3).
• FT.SampleEnterprise.Workcell_STARVED
When this monitored bit data point is on (1), the value maps
to the Starved machine state.
When this data point is on, the
FT.SampleEnterprise.Workcell_STATE data point has the
value of Down (3).
• FT.SampleEnterprise.Workcell_BLOCKED and
FT.SampleEnterprise.Workcell_STARVED
When both of these monitored bit data points are on, the
combined value maps to the Linefault machine state.
NOTE
The data referred to in this and following topics is for reference
only. It is not shipped with the <RSB<> suite.
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 121