Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 131)

Collecting Performance Data Chapter 3
For more information, see "Configuring the Machine States
(page 123)".
2. Configure a performance parameter event for each activity
area for which you want to collect downtime data.
For more information, see "Configuring User-defined
Performance Parameter Events (page 90)".
3. Define how the event affects machine states.
For more information, see "Configuring the Machine State /
Faults (page 111)".
To view the status information about the events associated with
the activity area:
1. Open the Configure Performance Parameters dialog box for
the selected activity area.
2. Under Performance Parameter Status, click one of the
following buttons:
• Configuration Status
This section contains the following information:
• FTTM Transaction Status
This section contains the following information:
Reviewing the Status of
Performance Parameters
Events
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 131