Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 68)

Chapter 3 Collecting Performance Data
4. Double-click the data point that you want to use.
The data point appears in the Data Point box in the
Configure Performance Parameters dialog box.
TIP
To delete the data point that you have selected,
click Clear.
• Select a lookup list to provide a description for the
numeric shift value collected from the control system.
Select the lookup list that you want to use:
• Click New to create a new list.
• Click Edit to modify the list that you have selected.
TIP
For more information on creating and editing the
Shift Description Lookup lists, see "Create Shift
Description Lookup Lists (page 71)".
• (Optional.) Select a data point to monitor for Scheduled
Availability.
1. Click Select.
The Select Data Point dialog box appears.
2. Under Filtering Tools, in the FT Transaction
Manager Topic/Device list, select the device from
which you want to load data points.
3. At the top of the dialog box, click Refresh Points.
The Data Points area at the bottom of the dialog box is
populated with data points for the selected device.
4. Double-click the data point that you want to use.
68 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014