Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 205)

Analyzing FactoryTalk Metrics Data Chapter 5
9. To specify the parts that you want to filter on, under
Additional Filtering, select Parts in the Filter On list.
10. Make sure the default All Parts option is selected.
NOTE
If you have User-defined Summarization Criteria configured for
the activity area that you are reporting on, you can filter also on
these criteria.
11. Click OK to save your filter.
A message appears informing that your filter has been saved.
12. Click OK to return to the RSBizWare OEE Box Control
Properties dialog box.
To customize the colors of the OEE bar:
1. In the RSBizWare OEE Box Control Properties dialog box,
click the OEE Bar tab.
You can use this tab to specify the bar colors in the OEE box
report. The default bar colors are red (for OEE values 0 to 50),
yellow (for OEE values 50 to 75), and green (for OEE values
75 to 100).
Step 5: Customize the OEE Bar
Colors
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 205