Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 149)

Automated Configuration Chapter 4
4. Click Open.
The project is loaded to the Logix Designer window.
In the Controller Organizer, under Data Types, right-click
User-Defined, and then Import Data Type.
The Import Data Type dialog box appears.
5. Navigate to <Program Files>\Rockwell
Software\RSBizWare, and then select the
FTM_Workcell.L5X file.
TIP
<Program Files> represents the path to the Program Files
folder in which you installed the RSBizWare suite.
6. Click Import.
The Import Configuration dialog box appears.
7. Click OK.
The following user-defined data types appear under the
User-Defined folder:
• FTM_AnalogEvent
This UDT collects information for custom events. It is
referenced by the FTM_Workcell UDT.
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 149