Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 151)

Automated Configuration Chapter 4
To create an array of the FactoryTalk Metrics UDT instances:
1. In Studio 5000, in the Controller Organizer, double-click
FTM_Workcell.
In the right pane of the window, tags that constitute the
FTM_Workcell UDT are displayed.
For details on how the tags in the UDT relate to individual
performance parameters in FactoryTalk Metrics, see "UDT
Tags and FactoryTalk Metrics Performance Parameters (page
140)".
2. Under the Controller item, right-click Controller Tags, and
then click New Tag.
The New Tag dialog box appears.
3. In the Name box, type a name for the array of UDTs, for
example
Workcell
.
TIP
We suggest that you use "Workcell" as the name of the UDT
array, because it is the default name used by the FactoryTalk
Metrics Configuration Tool.
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 151