Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 93)

Collecting Performance Data Chapter 3
Use this data summarization type: To:
Scheduled Shift Start and End or Summarization Criteria
Change Summarize the event data at the beginning of each shift, at the end of each
shift that is followed by Out of Shift time, and when there is a change in
any Summarization Criteria, Part Id, or Cycle Time that is being monitored
for the Performance Parameters configuration.
This data summarization type is a combination of the Scheduled Shift Start
and End and Summarization Criteria Change types.
Any Scheduled Shift Change or Summarization Criteria
Change Summarize the event data at the beginning of each shift, at the end of each
shift that is followed by Out of Shift time, when there is a change of
Available states within a shift, and when there is a change in any
Summarization Criteria, Part Id, or Cycle Time that is being monitored for
the Performance Parameters configuration.
This data summarization type is a combination of the Any Scheduled Shift
Change and Summarization Criteria Change types.
Performance Trending Summarization Summarize the historical data for Performance Parameters at regular
intervals specified by the Performance Data Trending Rate, on any change
of Shift or Available states within a shift, as well as when a change in any
Summarization Criteria, Part Id, or Cycle Time data occurs.
The event data will be summarized at the same time that Performance
Parameters data is summarized.
No Summarization Choose not to summarize the event data at any time. The event will have
one record for its entire duration.
Note: Use this data summarization type with caution because using it
could result in creating event records that would make reporting less
accurate.
How do I access the dialog box?
1. On the Configure menu, click FactoryTalk Metrics >
Performance Parameters.
The Manage Performance Parameters dialog box appears.
2. Select the activity area for which you want to associate
machine states, and then click Configure.
The Configure Performance Parameters dialog box appears.
3. If necessary, select the FactoryTalk Transaction Manager
configuration for the activity area.
Configuring the Event Trigger
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 93