Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 54)

Chapter 3 Collecting Performance Data
Select this option if you do not want the application to
collect values for this parameter. The OEE rating for the
activity area will always be based on all user-defined
summarization criterion values of this type.
• Specify a default Summarization Criteria Value for this
Plant Model Activity Area.
Select this option if you want to set a single value for the
summarization criterion. The OEE rating for the activity
area will always be based on this value. For example, if a
particular operator always runs this piece of equipment, you
may set the Operator ID parameter as the default value.
In the Value box, type the name of the parameter that you
want to use.
• Specify an Unscheduled Data Point to provide
Summarization Criteria information for this Plant
Model Activity Area.
Select this option if you want to monitor a data point in the
control system to determine the value for the
summarization criterion. Changes in the value allow
FactoryTalk Metrics to track operation conditions to a
specific value. For example, for the Operator ID, this would
allow FactoryTalk Metrics to track which operator is
running the machinery, and allow you to obtain the OEE
rating for the activity area if a specific operator is running
the machinery:
1. Click Select.
The Select Data Point dialog box appears.
54 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014