Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 34)

Chapter 3 Collecting Performance Data
NOTE
Since the default value of the time pattern is Unavailable, the
half hour between the time spans is considered unavailable,
because it has not been defined as available. A time span that is
unavailable shows 0 capacity in the time pattern chart.
16. Under Time Patterns, right-click Shift A, and then click
Duplicate.
A copy of the shift is added to the tree.
17. Change the name of the shift to
Shift B
.
18. Under Report Name, type
Shift B
.
19. Under Time Patterns, right-click Shift B, and then click
Duplicate.
A copy of the shift is added to the tree.
20. Change the name of the shift to
Shift C
.
21. Under Report Name, type
Shift C
.
To configure a Work Day time pattern:
1. In the Time Patterns dialog box, right-click My Time
Patterns, and then click New Time Pattern.
A new time pattern is added to the tree.
2. Change the default name to
Work Day
.
Configuring Work Day Time
Patterns
34 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014