Rockwell Automation FactoryTalk Metrics User Guide User Manual
Page 95
![background image](/manuals/581334/95/background.png)
Collecting Performance Data Chapter 3
Select a data point:
1. Under Data Point, click Select.
The Select Data Point dialog box appears.
2. Under Data Points, select a data point, and then click
Select.
The data point that you have selected appears in the Data
Point box.
3. Continue with "Configuring the Event Value (page 99)".
If you have selected any of these event trigger types:
• Monitored Formula Low to High Transition
• Monitored Formula High to Low Transition
Create a formula:
1. Under Configure a Formula for the Event Trigger, click
Edit.
The Formula Parts dialog box appears.
2. Follow the steps described in "Configuring a Formula (page
60)", and define your formula.
3. Continue with "Configuring the Event Value (page 99)".
If you have selected any of these event trigger types:
• Monitored Periodic Value
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014
95