Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 49)

Collecting Performance Data Chapter 3
4. In the Cycle Time box, type an ideal cycle time value in
seconds.
5. Click OK.
The Part Id and its cycle time value appear under Part Ids and
Cycle Times in the Part Id/Cycle Time List Configuration
dialog box.
6. Repeat the steps for other Part Ids for which you want to set
individual ideal cycle time values.
To manage Part Id configurations:
• To edit a Part Id configuration, click the Part Id item under
Part Ids and Cycle Times, and then click Edit.
The Part Id/Cycle Time Values dialog box appears.
• To delete a Part Id configuration, click Delete.
To import Part Id configurations:
1. Create a text file with Part Id configurations.
2. In the file, type the data in the order in which it will be
displayed in the dialog box, that is:
<Part Id>,<Ideal cycle time>
3. Separate each chunk of data with a comma, for example:
AAA,2
4. Save the file in the .csv format.
5. Under Previous Import File Path, click Import.
If there are Part Id configurations defined in the dialog box,
the following message appears:
Managing Part Id
Configurations
Importing Cycle Time
Values for Individual Part
Ids
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 49