Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 94)

Chapter 3 Collecting Performance Data
4. In the left pane of the dialog box, under Custom, click Events.
In the right pane of the dialog box, a list of available categories
and events appears.
5. Click New.
The Configure Performance Parameter Event dialog box
appears.
To configure the event trigger:
1. In the left pane of the dialog box, click Event Trigger.
2. In the Event Trigger Type list, select one of the following:
• Monitored Bit Low to High Transition
• Monitored Bit High to Low Transition
• Monitored Value
• Monitored Formula Low to High Transition
• Monitored Formula High to Low Transition
• Monitored Periodic Value
• None
TIP
For information on the event trigger types, see "Event
Trigger Types for System-generated and User-defined
Events (page 97)".
The following steps will differ depending on the event trigger
type that you have selected.
If you have selected any of these event trigger types:
• Monitored Bit Low to High Transition
• Monitored Bit High to Low Transition
• Monitored Value
94 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014