Step 4. import lookup lists and machine states, E 164) – Rockwell Automation FactoryTalk Metrics User Guide User Manual
Page 164
Chapter 4 Automated Configuration
NOTE
This step is optional.
In this step you can import to your configuration machine states,
shift and event lookup lists from CSV files.
To load machine states:
1. On the FT Metrics Lists tab, in the Machine State list box,
type the location of or click
to navigate to the CSV file
that contains machine states.
2. Click Create.
The following message appears:
The machine state list is added to your configuration.
To create a shift lookup list:
1. Click Shift Lookup List
2. In the List Name box, type a name for the list.
3. In the Dictionary list box, type the location of or click
to
navigate to the CSV file that contains the lookup code values.
4. Click Create.
The following message appears:
Step 4. Import Lookup Lists
and Machine States
164
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014