Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 101)

4
●
Work with a Display
●
●
●
●
●
83
Depending on the symbol type, the following elements change to the
color displayed on the button.
 Symbols that display text use the line color to determine the color
of the text within the symbol.
 Symbols that have lines (such as ellipses) use the line color to
change lines in the symbol.
3. Click the arrow on the right side of the Line Color button to display
the color palette. Choose from the 16 colors available or click one of
these two buttons:
Custom Color Launches the Color dialog box where you can choose additional
colors from a color well of options.
None Disables line color. Setting the line color to None for Pen
elements on a trend hides the trace and its associated markers.
Fill Color
To determine what type of formatting is applicable for each symbol, refer to
the table of editable formatting attributes (page 81).
To configure fill colors:
1. In Build mode, open a display, and click the symbol(s) whose fill
color you want to change.
2. On the Symbol Formatting toolbar, click the Fill Color button
. The interior color of the selected symbol(s) changes.
The Fill Color button is disabled if the selected symbol does not support
this property.