Save and close a processbook – Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide User Manual
Page 76
Advertising
●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
58
Save and Close a ProcessBook
After creating a ProcessBook, it is a good idea to name the file and save it
immediately. It is also important to save a ProcessBook periodically while
you are working in it.
When you save a ProcessBook, all changes to all entries and to the
organizational structure are stored permanently. The ProcessBook remains
open in your workspace so you can continue working.
1. To save a ProcessBook for the first time, click File > Save or Save As.
The Save As dialog box appears.
2. Type a name for the ProcessBook file. A .piw extension is
automatically added.
3. Select the drive and directory where you want to save it.
4. Click OK.
Advertising