Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 262)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
244
How to Change Element Context
You can dynamically change the context for the selected element on your
symbols by clicking an element name in the Elements of Interest pane on
the Element Relative Display window (page 244). The attribute data that
appears on your dynamic symbol corresponds to the active element you
choose. If the attributes you select are not available for a selected element,
you see No Data on the display when that element is selected.
Work with the Element Relative Display Window
Configure a dynamic symbol with element relative data by adding
attributes from a specific element to a display. You can dynamically
change the context for the selected element on your symbols by clicking an
element name in the Elements of Interest pane on the Element Relative
Display window (page 244). The attribute data that appears on your
dynamic symbol corresponds to the active element you choose. If the
attributes you select are not available for a selected element, you see No
Data on the display when that element is selected.
To use the Element Relative Display window: