Create a trend – Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide User Manual
Page 122
●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
104
Plot Title
The title of the trend being configured. The plot title can be blank, but
a title is supplied by default.
Grid lines
Used to mark intervals along the time and value scales.
If the Plot Time continues through the current time, the trend updates as
information changes, unless the length of the overall time period exceeds
the limit set by your System Administrator. The default limit is 7 days.
This value is configurable.
Create a Trend
To create a trend:
1. Open a display.
2. On the Drawing toolbar, click
, or click Draw > Trend.
The mouse pointer changes to the Trend pointer
.
3. Click in the display where you want to add the trend and drag the
pointer to form a rectangle into which the trend will be placed.