Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 227)

6
●
Work with Symbols
●
●
●
●
●
209
 Click Send to Back to move it to the bottom of the stack (below
everything).
Align Multiple Symbols
You can align drawing symbols (page 80) with each other. Use this feature
to align symbols along their tops, bottoms, sides, or centers (either
vertically or horizontally). The first symbol you select is the symbol to
which others are aligned.
When two or more value symbols are aligned, the text justification for each
matches the alignment rule: left, center, or right.
1. Select the symbols you want to align.
2. Click Arrange > Align. The Align menu is displayed.