Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 287)

7
●
Data Streams
●
●
●
●
●
269
3. From the Tools menu, select Data Sets. The Data Sets (page 246)
dialog box appears.
4. Under Data Sets, click the data set you want to copy, and then click
Copy. The Copy Data Sets dialog box appears.
5. Under To Open Workbook, select the correct target, and then click
OK.
Loading Custom Data Sets
Before you can access a custom data set in a display, you must create a
data set add-in and install it on your computer. Then you must select it
through the FactoryTalk Historian ProcessBook Add-In Manager (page
13) dialog box.
Configure a Symbol with an AF Attribute
The AF2.x dataset provides access to the AF database allowing you to
configure a FactoryTalk Historian ProcessBook symbol with an AF
attribute.
From any symbol definition dialog box, click the Tag Search button and
select AF2 to open the Select AF Attribute dialog box.
If AF2 is not in the drop down list, it might not be loaded. Load it from
Tools > Add-In Manger.