Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 54)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
36
Change the Language Used for FactoryTalk
Historian ProcessBook
You can change the language for the application on your machine if you
have a FactoryTalk Historian ProcessBook Language Pack and the desired
language resources installed. The language setting is per user locale, so if
others want to use the application on the same machine under a different
login, they can use different language resources, if they are available.
To change the application language:
1. Run the FactoryTalk Historian ProcessBook Language Pack and select
the language resources you want to install, if they are not already
available.
2. Click Tools > Preferences. The ProcessBook Preferences dialog box
appears.
3. On the General tab, click the Language Settings to launch the
language selection tool. This button is only active if you have
language resources installed.
4. Select the target language and click OK.
5. Quit and restart the application.
FactoryTalk Historian ProcessBook now appears in the specified language.
Note that users who log in with the same account see the same language,
but the language does not change for those logging in to the machine with
different accounts.
About FactoryTalk Historian ProcessBook
You can launch the About FactoryTalk Historian ProcessBook dialog
box by clicking Help > About FactoryTalk Historian ProcessBook. The
dialog box provides detailed version and build information.