Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 112)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
94
A display must be reverted to re-establish any build time configuration
time ranges for individual symbols.
The Change Display Range Dialog Box
Use the Change Display Range dialog box to specify the display range.
Rules for time settings:
 The start and end time boxes support all time string formats
recognized by FactoryTalk Historian.
 You can edit the times manually. The dynamic time strings, such as *-
1h, that you set are added to the drop-down list. .
 Static time strings, such as 1-Jan-2009, are not added to the list.
 Each drop down list saves the ten most recently used values.
 Settings are stored per user.
This button is available only when playback is not active.
Move the Display Range During Playback
The location of the display range on the scroll bar tracks the time of the
playback on the display. The display range always advances from left to
right from its initial start position while playing.
There are several ways to move the display range while you play back a
display: