Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 188)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
170
5. In the Server list, select the server to use for manually entered tags. If
the server and tag name are both entered in the Tag box, this field is
updated to show the new server name. This field is ignored for non-
FactoryTalk Historian data.
6. In the Tag box, type the name of the tag you want to display on the
bar, or
7. Click the Tag Search button to locate a tag, or click the Tag Search
arrow to see more search options:
 Tag Search (page 231)
 FactoryTalk Historian calculation (page 248) (data set)
 ODBC (page 254) (data set)
 AF2 (page 269) - launches the Select AF Attribute dialog box,
from which you can search an AF database for elements and
attributes.
 Element Relative (page 240) - launches the Element Search
dialog box from which you can search an AF database for
elements.
8. From the Upper and Lower lists, select the maximum and minimum
values you want to use for the bar. Type a constant, or choose Tag
Zero() or TagZero()+TagSpan() for either or both values.
9. If you choose a maximum value that is too small, the bar will be fully
colored but there will be no warning that it has exceeded the maximum.
10. From the Start list, select the point on the bar from which you want to
start drawing the bar. Type a constant, or select TagZero()+TagSpan()
or Tag Zero().
11. Under Orientation, select one of the options to display the bar either
vertically or horizontally.