Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 113)

4
●
Work with a Display
●
●
●
●
●
95
 Use the Time Tracker arrow keys to move the display range current
position.
 Click the scroll bar on either side of the display range to move the
display range to the position where you click.
 Click anywhere in the display range and use the left and right arrow
keys to move the display range back and forward across the scroll
period.
Layers within Displays
You can divide a display into layers containing one or more symbols. This
feature could be useful in building a complex display with several systems
depicted (electrical, HVAC, etc.). If you separate systems by layer, you can
view any one of the layers by making the other layers invisible.
 A layer can be Visible or Invisible in Run mode. Layers are always
Visible in Build mode.
 You can move symbols between layers or remove them from a layer.
 Add, make visible, restack, and lock layers while ProcessBook is in
either Run mode or Build mode. Delete layers only when
ProcessBook is in Build mode.
Create Layers
To create a layer:
1. Open a display.
2. Click or double-click the Layers icon in the status bar
-or-