Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 244)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
226
Status Report for Dynamic Symbols
The status bar at the bottom of the FactoryTalk Historian ProcessBook
application shows whether dynamic symbols in a display are updating
normally. The Status icon is a green circle when there are no errors. It is a
blue circle containing a question mark (?) if the display shows questionable
data or a yellow arrow for substituted data. It contains an X in a red circle
if a dynamic symbol is reporting bad data (or shutdown status). As you
shift focus from one display to another, the icon may change. If you shift
back to the Table of Contents, the status icon remains from the last display
in focus.
or
The Status Report dialog box appears when you have a display in focus
and double-click the Status icon. This report lists all the symbols in a
display that have data associated with them. You see the tag to which the
symbol is connected and, if there is an issue, the error message appears.
You can sort the list by any of the column headings.