Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 338)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
320
PB2TraceCompatibility Indicates whether all snapshot values are retained for trend
traces or discarded when a new archive event is received on
updating trends.
 1 = Yes. Do not replace snapshot values when a new archive
event is received. This setting may result in a jagged trace that
gets smoothed when the trend is reverted.
 0 = No. Use snapshot value filtering/removal logic so that only
archive values and any snapshot values since the last archive
event are shown on the trend.
EnableConnector
Attachments Controls whether symbols drag and dropped on top of a
connector are made into connector attachments.

1 = true - allow.
 0 = false - do not allow.
ConnectorsAvoid
Connectors
Controls whether connectors are treated as obstacles to be
avoided when performing object avoidance.
 1 = true - connectors are avoided in object avoidance.
 0 = false - connectors are not avoided in object avoidance.
AutoEnableScripting When set to True, new dynamic symbols are automatically
enabled for scripting. If set to False, new dynamic symbols are
not automatically enabled for scripting. The False setting may
improve performance for very complex displays with many
symbols.
Startup Example
[Startup]
Startup ProcessBook=PIDEMO.PIW
DefaultFileLocation="C:\Program Files (x86)\Rockwell
Software\FactoryTalk Historian\PIPC\Procbook"
ModeBias=R
Retain Aspect Ratio=0
Symbol Library=SYMLIBRY.PIW
PromptForConversion=[PB_PROMPTFORCONVERSION]
Show Value Attributes=1
PB2TraceCompatibility=0
MakeBackupFile=0
ToolTipsEnabled=Y
Author=