Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 32)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
14
2. Click an available add-in from the Available Add-Ins list.
3. A description of what the add-in does appears in the Description box.
4. Under Load Behavior, select the appropriate check boxes:
 Loaded/Unloaded
Loads or unloads the selected add-in. The add-in's current status
appears in the Load Behavior column at the top.
 Load on Startup
Loads the selected add-in on startup of FactoryTalk Historian
ProcessBook. The add-in's current status appears in the Load
Behavior column at the top.
 Command Line
Loads the selected add-in when FactoryTalk Historian
ProcessBook is started from the command prompt or from a
script.
5. Click OK to complete the action and close the dialog box.
If the add-in is unloaded and then reloaded, you must click the Revert
toolbar button to re-synchronize any symbols using the add-in.
Menus and Toolbars
Command Menus
The active components of menu bars change depending on the active
window and current selections. There are five different collections of menu
commands.
Menu Bar Function
Default Displays when no documents are active