Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 215)

6
●
Work with Symbols
●
●
●
●
●
197
The add-in can be unloaded or set not to load at startup by changing the
options in the Add-in Manager (page 13) dialog box. When the Data
Favorites add-in is first loaded, its window appears in the upper left corner
of the FactoryTalk Historian ProcessBook application window. The
window is only accessible in Build mode. If the window is closed, in Build
mode, click View > Data Favorites.
There are two panels within the Data Favorites window:
 Search (page 198)
 Favorites (page 199)
Each panel can be collapsed if it is not needed.
Select a Default Symbol for Data Favorites
The Default Symbol button controls which symbol is created when
data streams are dropped on an empty area of the display. To set the default
symbol, click the Default Symbol button and select an option from the
drop-down list.
Available symbols:
 Bar (page 168)
 Trend (page 103)
 Value (page 162)
 XYPlot (page 133)
If the selected symbol type does not support the data type of the
dropped data stream, a value symbol is drawn instead.