Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 74)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
56
Move the highlighted entry down.
Change the Name of an Entry in Outline View
To change the name of an entry in the Outline view:
1. Click View > Outline.
2. In Build mode, click the entry you want to change.
3. Click Edit > Selected Item. The Define ProcessBook Entry dialog
box appears.
4. Under Label, type a new name.
5. Click OK.
Change the Level of an Entry in Outline View
To change the level of an entry in the Outline view:
1. Click View > Outline.
2. In Build mode, click the entry you want to change.
3. Click Edit > Selected Item. The Define ProcessBook Entry dialog
box appears.
4. Under Level, click the level at which you want to reposition the entry
in the ProcessBook hierarchy of entries or type a number between 1
and 10.
5. Click OK.