Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 53)

2
●
FactoryTalk Historian ProcessBook Essentials
●
●
●
●
●
35
Print Preview
Print Preview displays your selection as it will look when it is printed.
Note that the Print Preview shows colors even though you may be using a
black and white printer.
Once you select the item you want to preview, click File > Print Preview.
Zoom in or out of the selection by clicking on the selection with the
magnifier cursor or by clicking the Zoom buttons. To print the selection,
click the Print button.
Printer Setup
Select Print Setup to choose a printer, page orientation, and paper size. In
addition, you can fine-tune the quality of output or the performance of your
printer. The settings you choose in Print Setup become the defaults for all
your printing.
1. Click File > Page Setup. The Print Setup dialog box appears.
2. Select the printer, orientation, and paper size and source.
FactoryTalk Historian ProcessBook supports dot matrix, HP PCL
(LaserJet), Postscript, and color printers. However, all Windows print drivers
may not be compatible. If you are not sure if your printer is supported or you
observe any printing problems, contact Rockwell Automation Customer
Support.
3. Click the Properties button to select printer-specific options. Refer to
your printer documentation for additional information about these
options.