Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 52)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
34
Each topic in the help file may be printed separately or you can print them
all at once.
The Print command is accessible from the File menu, CTRL+P, or the
print button. You can print the contents of the active window or if you
select items within a display before you open the Print dialog box, then
you can choose to print only those items.
On a non-color printer, symbols are printed in shades of gray, but trends are
printed in black and white.
On some printers, when you print a trend with cursors, the value and time
stamp boxes of the cursor does not hide the information beneath them.
However, other trend cursors and the trend time scale may show through
the trend cursor boxes, making the values hard to read.
Page Setup for Printing
You can select the particular printer, the orientation of the paper, the paper
size, and the source within the printer of the paper. Use the Properties
button to fine-tune the quality of output or the performance of the printer.
The settings you choose in Page Setup become the defaults for all your
printing.
FactoryTalk Historian ProcessBook supports dot matrix, HP PCL (LaserJet),
Postscript, and color printers. However, all Windows print drivers may not be
compatible. If you are not sure if your printer is supported or you observe any
printing problems, contact Rockwell Automation Customer Support.