Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 193)

5
●
Visualize Data with Symbols
●
●
●
●
●
175
is 50 or below, the symbol appears blue. Above 50, the symbol appears
red. A color and sometimes a blinking attribute are assigned for data in bad
status (e.g., the interface becomes disconnected). For digital point types, a
different color may be assigned to each digital state.
Create Dynamic Multi-State Symbols
You can create a Multi-State symbol after you have drawn a symbol or
copied one from the Symbol Library dialog box.
1. In Build mode, open a display.
2. Click the symbol that you want to use for creating a Multi-State
symbol.
On the Formatting toolbar, click , or click Edit > Multi-State.
The Multi-State Symbol dialog box appears.