Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 205)

5
●
Visualize Data with Symbols
●
●
●
●
●
187
Use a Symbol from the Symbol Library
To add a symbol from the Symbol Library to a display:
1. In Build mode, open a display.
2. On the Drawing toolbar, click , or on the Draw menu, click
Symbol Library. The mouse pointer changes to the Symbol Library
pointer.
3. Click in the display where you want to add the symbol and drag the
pointer to form a rectangle into which the symbol will be placed.
When you release the mouse button, the Symbol Library dialog box
appears.
4. Under Categories, click the type of symbols you want to use, such as
Boilers, Controllers, Valves, etc.
5. Click Options (page 188) to modify your symbol.