Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 219)

6
●
Work with Symbols
●
●
●
●
●
201
Drags can come from any application that supports the text clipboard
format, for example, Microsoft Word or Excel.
Time Range Toolbar
The Time Range toolbar is used for working with dynamic symbols. This
toolbar is hidden by default for new installations of FactoryTalk Historian
ProcessBook 3.2 and later releases.
In general, the commands on this toolbar affect only the symbols selected
on the display. If no symbols are selected, all symbols are affected. This
toolbar, which must be used in Run mode, contains three buttons:
Revert (page 201) Returns the trend or other dynamic symbol to its original setting.
Change Time
Range (page 202)
Opens a dialog box to set new, temporary start and end times. For
Bars, Values, and Multi-State symbols you can only set an end time.
Scroll Bar (page
203)
Scrolls through time values.
Revert Time Range
To discard any of the changes you have made to the time range of a trend
or the effective time of a Bar, Value, or Multi-State symbol and return it to
its saved setting: