Embed an existing file in a display – Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide User Manual
Page 306
Advertising
●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
288
You must be in Build mode in order to insert a new object. Click Insert >
Object to launch the Insert Object dialog box.
Embed an Existing File in a Display
To embed an existing file in a display:
1. Open the display.
2. In Build mode, click Insert > Object. The Insert Object dialog box
appears.
3. Select Create from File.
4. Click Browse. The Browse dialog box appears.
5. Browse and locate the file you want to embed and then click Open.
The file name is displayed in the File box.
6. If you want to display an icon rather than a graphic, select Display as
Icon.
Advertising